RADVision SCOPIA 400, User Manual

Page: 102 / 208

92 SCOPIA 400/1000 Gateway User Guide
Configuring Gateway Settings
C
ONFIGURING
IVR
S
ETTINGS
In the IVR section of the Settings tab, you can configure the Gateway to route
calls using an Interactive Voice Response (IVR) system.
Procedure
1 In the Gateway interface, on the sidebar, click Gateway (if not already
selected).
2 Click the Settings tab.
3 Click the IVR button.
16 Call deflection has occurred.
17 Access denied.
18 The called party is not registered at the destination.
19 The calling party is not registered.
20 The connection failed and a new one should be made.
21 The called party has no H.245 capabilities.
22 Facility message sends conference list choice.
23 Request to establish H.245 connection.
24 An indication from an endpoint or a gatekeeper to send a new set of tokens
in the
tokens and/or cryptoTokens field of the Facility message.
25 Indicates that the purpose of the message is to update feature set
information that was previously sent in the Facility message.
26 Indicates that the purpose of the message is to forward elements of another
message, if that message cannot be sent.
27 Indicates that the purpose of the message is to transport higher-layer
information.
Table 3-7 Disconnect Reasons (continued)
Number H.323 Call Disconnect Reason