RADVision SCOPIA 400, User Manual

Page: 115 / 208

Configuring the SCOPIA Gateway 105
Configuring Gateway Settings
User logged out A user logs out of the system via the web
interface. Information
Table 3-10 Serial Gateway SNMP Trap Event Types
Event Type Trap is sent when ... State Severity
Abnormal
disconnect A call has disconnected for a reason other
than normal, busy or no answer. Warning
Authentication
failure (specific) A login attempt to the web interface fails
due to incorrect user name or password. Warning
Bad video Corrupt or empty video packets are present
in the Gateway. Includes the ID number of
the call during which the event occurs. TRUE Minor
FALSE Clear
Cables mismatch A serial cable is not appropriate for the
configured serial port settings. Warning
Call from
non-peer H.323
entity rejected The Gateway has rejected an incoming IP
call because the source does not appear in
the peer list. Warning
Call from peer
rejected due to
capacity A call from a peer has been rejected because
the Gateway does not have enough
resources available. Warning
Call is out of
synchronization There is a loss of synchronization for data
coming from the serial side (relevant only
when the
Signaling protocol field is set to
Manual Control in the Physical Interface
section of the Port tab).
Warning
Call to peer failed
- peer list empty A call to a peer has failed because the peer
list is empty. Major
Table 3-9 PRI Gateway SNMP Trap Event Types (continued)
Event Type Trap is sent when: State Severity