RADVision SCOPIA 400, User Manual

Page: 44 / 208

34 SCOPIA 400/1000 Gateway User Guide
Initial Gateway Configuration
5 Insert a blank cover panel provided by
RADVISION
.
6 Secure the blank cover panel screws.
Caution
Blank faceplates and cover panels serve three important functions:
they prevent exposure to hazardous voltages and currents inside the chassis;
they contain electromagnetic interference (EMI) that might disrupt other
equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all blades, faceplates, front covers, and rear covers
are in place.
I
NITIAL
G
ATEWAY
C
ONFIGURATION
Initial monitoring and administration of the Gateway are performed from a
remote PC via a serial connection. This allows you to access the boot
configuration menu of the Gateway. At power-up, the Gateway goes through the
following boot phases:
Auto-boot —The embedded operating system initializes and displays
basic information.
Configuration menu —A 6-second countdown allows you to enter
the configuration menu.
Initialization —The Gateway completes its boot sequence and is
ready for operation.
Note You can perform serial port configuration of the Gateway only at startup,
during a short period indicated by a 6-second countdown. Once the initialization
phase is complete, the only way you can access the configuration menu is by
restarting the Gateway.