RADVision SCOPIA 400, User Manual

Page: 17 / 208

Functionality 7
About SCOPIA Gateway Applications and Topologies
A
BOUT
SCOPIA
G
ATEWAY
A
PPLICATIONS AND
T
OPOLOGIES
The SCOPIA Gateway supports multimedia conferencing by translating
between H.323 and H.320 protocols. Examples of network applications that use
the Gateway include:
Multimedia conferencing (see About Multimedia Conferencing on
page 8)
Point-to-Point conferencing (see About Point-to-Point Conferencing
on page 9)
Multipoint conferencing (see About Multipoint Conferencing on
page 9)
IP networking (see About Gateway IP Network Connections on
page 10)
ISDN networking (see About Gateway ISDN Network Connections
on page 10)
Encryption interoperability N/A KIV-7, KG-194
PRI interface Configurable E1/T1 PRI network interface.
Support for fractional E1/T1 channel
selection.
Configurable as terminal side (TE) or
network side (NT) device.
Configurable Long Haul PRI module
(supported in Japan only). N/A
Switch information Numbering Plan Identifier (NPI), Type of
Number (TON) and Network Specific
Facility (NSF) information elements are
configurable per PRI port. N/A
Bonding calls Internal Imux providing calls at 128 Kbps
(2B) up to full PRI of 1472 Kbps (23B) for
T1 and up to full PRI of 1920 Kbps (30B) for
E1 using bonding mode 1. N/A
Parallel dialing for bonded calls.
Internal IVR capacity 30 simultaneous calls 4 simultaneous calls
Table 1-2 Gateway Feature Specifics (continued)
Feature Gateway P20 SP Gateway S40 SP