manualshive.com logo in svg

RADVision SCOPIA 400, User Manual

Share
Download
RADVision SCOPIA 400 User Manual Download Page 2

N

OTICE

© 2000-2008 

RADVISION

 Ltd. All intellectual property rights in this publication are owned by 

RADVISION

 Ltd and are protected by United States copyright laws, other applicable copyright laws 

and international treaty provisions. 

RADVISION

 Ltd retains all rights not expressly granted. 

This publication is 

RADVISION

 confidential. No part of this publication may be reproduced in any 

form whatsoever or used to make any derivative work without prior written approval by 

RADVISION

 

Ltd. 

No representation of warranties for fitness for any purpose other than what is specifically mentioned 
in this guide is made either by 

RADVISION

 Ltd or its agents. 

RADVISION

 Ltd reserves the right to revise this publication and make changes without obligation to 

notify any person of such revisions or changes. 

RADVISION

 Ltd may make improvements or 

changes in the product(s) and/or the program(s) described in this documentation at any time. 

If there is any software on removable media described in this publication, it is furnished under a 
license agreement included with the product as a separate document. If you are unable to locate a 
copy, please contact 

RADVISION

 Ltd and a copy will be provided to you. 

Unless otherwise indicated, 

RADVISION

 registered trademarks are registered in the United States 

and other territories. All registered trademarks recognized.

GoAhead WebServer is used by permission from GoAhead Software, Inc. GoAhead WebServer is 
used by permission from GoAhead Software, Inc. Copyright © 2006 GoAhead Software, Inc. All 
Rights Reserved.

For further information contact 

RADVISION

 or your local distributor or reseller. 

SCOPIA Gateway version 5.6, May 2008

Publication 10

http://www.radvision.com

Summary of Contents for SCOPIA 400

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands