RADVision MCU-323, User Manual

Page: 150 / 185

Using the Advanced Commands of the MCU-323
9-4
Command Name and Description Parameter Range
SpeakSlct_fast
Selects fast video switching mode. This
mode is useful when fast and interactive
video switching is required. This is the
default mode for the MCU-323.
N/A
SpeakSlct_slow
Selects slow video switching mode. This
mode is useful when background noise
causes a high level of false video switching
sequences. This mode will decrease the
number of false switching events causing the
switch to be less sensitive.
N/A
Unregister
Unregisters the MCU-323 from the
Gatekeeper. You can then register the
MCU-323 with another Gatekeeper.
N/A
VdoCPmatrix: x
Configures the position of the
voice-activated quadrant in the Continuous
Presence screen.
1 – upper left quadrant (default)
2 – lower right quadrant
VdoSWMode:XXXXX
Displays or sets the video switching mode
for the MCU-323. The default mode is
CUCME.
No Parameter — Displays the current video
switching mode.
ALLC1 — All participants see the
participant that is talking the loudest, and the
participant talking the loudest sees
himself/herself.
CUCME — All participants see the
participant that is talking the loudest and the
participant currently talking sees the previous
participant that spoke.
Additional advanced commands may be available for different versions of the MCU-323.
Contact RADVision Technical Support at HWsupport@tlv.radvision.com or
OnLANsupport@radvision.com for additional information.