RADVision MCU-323, User Manual

Page: 135 / 185

Disconnecting a Participant
7-13
Disconnecting a Participant
The Disconnect feature is used to disconnect a participant from a conference. It can also be
used to break up a cascaded conference into its component conferences. This is done by
disconnecting the MCU-323s participating in the conference.
A typical scenario for disconnecting a participant is having invited someone to join your
conference without knowing whether the person is actually at the terminal. If the invited
person’s terminal is set to respond automatically, it connects to the conference even when
no one is present. Disconnecting the unattended terminal conserves telephone or ISDN
resources, and frees a channel for another participant to use.
Figure 7-6 – Disconnecting a participant from the conference
!
To disconnect a participant
1. Select the participant you want to disconnect. Click Disconnect . A confirmation
message appears at the bottom of the left frame.
2. Click Ok to confirm. The selected participant is disconnected from the conference and
the main frame is updated.