RADVision MCU-323, User Manual

Page: 102 / 185

Configuring the Unit
6-10
Linking a Conferencing Service to an MP.
Continuous Presence — Enables the simultaneous display of up to four conference
participants on the same screen. The following settings are available in the Continuous
Presence list box:
"
Disable – Select this to disable Continuous Presence.
"
Master – Select this to enable Continuous Presence if this unit is the Master for the
conference.
"
Slave – Select this to enable Continuous Presence for all secondary units in the
conference.
Continuous Presence operates by mixing 4 QCIF channels into one CIF stream. Continuous
Presence operates with the H.261 video format only. Up to 12 parties can participate in a
Continuous Presence conference (see
Table 6-3 in the description for Number of Parties ).
Terminals that are connected via Gateways or the VIU–323, can participate in a Continuous
Presence conference, but only view a single picture containing the active speaker.
Adding, Editing, or Deleting Conferencing Services
The Services Definition Table allows you to add new services, and to edit or delete
existing services.
!
To add a service to the Services Definition Table
1. In the Services Definition Table , click Add . The Service Settings screen is displayed.
2. Enter the required settings, following the explanations provided for each parameter.
3. Click Ok in the to add this service to the Services Definition table.
!
To edit a service
1. Select the line in the table representing the service you want to edit and click Edit .
The Service Settings screen is displayed for that service.
2. Make the necessary changes, and click Ok to confirm.
!
To delete a service
•
Select the entry in the table for the service you want to delete, and click Delete . The
selected service is deleted from the Services Definition Table .