RADVision MCU-323, User Manual

Page: 108 / 185

Configuring the Unit
6-16
Linking a Conferencing Service to an MP .
Description — A description of the MP in free text; limited to a maximum of 31 characters.
IP Address — The IP address of the MP. For optimal functionality of the Distributed
MCU-323, make sure each MP is connected on a separate LAN segment.
Status (Enable/Disable) — Allows you to enable or disable the availability of an MP.
Select this check box to enable the MP. When disabled, the Distributed MCU-323 does not
use this MP to process video and audio channels.
Adding an MP Entry
Figure 6-9 – MP Settings screen
!
To add an MP entry to the MP Definition Table
1. If you have already defined several MPs, and want to add a new MP entry to the
middle of the list, select the MP entry after which you want to add the new MP and
click
Add . The MP Settings screen is displayed.
2. Enter the IP address and a description, and check the Status check box to Enable the
MP.
3. Click Ok. The new MP entry is added to the MP Definition after the previously
selected entry.