RADVision MCU-323 User Manual Download Page 167

Page: 167 / 185

Uploading Flash Files to the MCU-323

C-3

Uploading Flash Files to the MCU-323

To upload a file to the MCU-323

In the

IP:

text box type the IP address of the MCU-323 to which you want to upload

the file.

Enter your User Name and Password in the text boxes provided.

From the list of files, locate and select the file you wish to upload. If the file you wish
to upload is not displayed, use the

Look in:

drop-down list box to browse for the

desired file.

Click

Upload

. A confirmation box is displayed.

Click

Yes

to confirm the upload process.

The connection attempt window displays connection progress. If the connection attempt is
not successful, an abort message is displayed.

When the configuration terminal connects to the unit, a status window shows the uploading
progress and confirms the name of the file destination and its IP address.

After a file is successfully uploaded to the MCU-323, the message “Upload Process
Complete” is displayed.

Summary of Contents for MCU-323


























































































































































































Search results

Summary of Contents for MCU-323

Reviews:

Related manuals for MCU-323

Brands by name

Popular brands

RADVision MCU-323, User Manual

Search results

Summary of Contents for MCU-323

Reviews:

Related manuals for MCU-323

Brands by name

Popular brands