RADVision MCU-323, User Manual

Page: 59 / 185

Zone Definition
4-13
Unit Type – The type of unit you are defining. Unit types include: Terminal , Gateway ,
MCU and Undefined . The Gatekeeper allows dynamic registration of a predefined endpoint
only when it corresponds to the Unit Type you set. If you are not sure what type of endpoint
you are predefining, choose Undefined .
Max. Distance – The logical distance outside this zone that the Gatekeeper allows this
endpoint to call. To inactivate, set to 0. For details on setting the distance parameters, see
Distance Settings .
Registration IP – This is the address through which the endpoint receives Registration
Admission Status (RAS) messages from the Gatekeeper. This field must be filled.
Port – This is the port number for this H.323 endpoint. The IP address together with the
port number form the socket that is the communication link between the endpoint and the
Gatekeeper. If this is the only endpoint running on the terminal you can leave the port
number set to zero. If two or more endpoints are running on the same terminal, you must
enter a different number for each port.
Terminal IDs and Phone Numbers – These are the aliases you assign to the endpoint. You
can enter up to five different ID s and five different Phone Numbers . Aliases should be
unique for endpoints in a zone, unless Zone Prefixes are defined. For details on setting
Zone Prefixes , see Services Definition . Additional phone numbers can be identical.
Allowed Services – Displays the Allowed Services screen, where you can define endpoint
access to services defined for the Gatekeeper.
Defining the Properties of a New Endpoint
!
To define properties for a new endpoint
1. In the Predefined Properties screen, select the type of endpoint you are adding from
the Unit Type drop down list.
2. Enter the Max. Distance if you want to set distance limitations (between 0 and 255) in
a multiple zone environment for this endpoint.
3. If the endpoint you are defining cannot register dynamically with the Gatekeeper,
select the
Online Always check box.
4. Enter the IP address of the endpoint in the Registration IP field.
5. Enter the port number of the endpoint in the Port field if necessary.
6. Enter the IDs and phone numbers you want to assign to this endpoint in the
corresponding fields.
If the endpoint supports dynamic registration, you have to enable the Gatekeeper to add the
predefined properties to the registration data. Otherwise, no calls are forwarded to the