RADVision MCU-323, User Manual

Page: 103 / 185

Configuring a Single Station MCU-323
6-11
Defining a Default Gatekeeper and Router
The Miscellaneous Settings screen allows you to define a gatekeeper and a default router
for the MCU-323, and gives you access to the Advanced screen.
Figure 6-5 – Miscellaneous Settings screen
The following parameters and settings are displayed in the Miscellaneous Settings screen:
Default Gatekeeper IP — Enter the IP address of the Gatekeeper with which you want the
MCU-323 to register. If you are using the built-in Gatekeeper, the IP address in this field is
the same as for the MCU-323 unit. If you disable the built-in Gatekeeper, you must define
an alternative gatekeeper IP address for the MCU-323.
Default Gatekeeper Port — The port through which the MCU-323 communicates with the
gatekeeper.
Default Router IP — The default router IP address for the network segment to which the
MCU-323 is connected.
T120 Server IP — The IP address of the external T120 server.
T120 Server Port — The port number for the external T120 server.
External T120 Server — Enables or disables support for the external T120 Server. The
number of calls supported by the T120 server depends on the type of license provided.