RADVision MCU-323, User Manual

Page: 43 / 185

Selecting the Unit Type and What You Want to Configure
3-7
Selecting the Unit Type and What You Want to
Configure
!
To set the unit function type
1. In the Configuration Source screen, select one of the function types displayed in the
Unit Type drop down list:
"
MCU (Single Station MCU–323)
"
MCU Distributed (Distributed MCU–323)
"
MP Dedicated (Dedicated MP)
2. From the Source drop down list, select the configuration source file. If this is a first
time configuration, select Current .
3. Click Unit Setup to access the multipoint conferencing unit configuration. Proceed to
the chapter Configuring the Unit , and refer to the section corresponding to the Unit
Type you selected for specific configuration instructions.
OR
Click Gatekeeper Setup to access the built–in Gatekeeper configuration. Proceed to
the chapter Configuring the Built–in Gatekeeper for configuration instructions.