RADVision MCU-323, User Manual

Page: 148 / 185

Using the Advanced Commands of the MCU-323
9-2
!
To use an Advanced command
1. Access the Advanced screen using the Advanced button in the Miscellaneous
Parameters screen.
2. Enter a command from the list below into the Command text box.
3. Click Send .
The command you entered is relayed to the MCU-323. The MCU-323 acts upon this
command and sends a response to verify that a valid command was entered. The response is
displayed in the
Response field of the Advanced screen. When you send an invalid
command, an “Unknown Command” response is displayed.
The following is a description of the available Advanced Commands :
Command Name and Description Parameter Range
CpUseDisp:XXX
Displays or sets the frequency of the CPU
usage load displays.
No parameter — Displays the current CPU
usage load.
None — No CPU usage information is
displayed.
Rare — Rarely displays CPU usage
information.
Often — Displays CPU usage often.
Differ — Displays CPU usage information
only if the usage changes by more than 1%.
DynamBitrateDflt: <rate>
Sets the default maximum dynamic bit rate.
Enter the required rate in kilobits–per–
second from 64 Kbps up to 1500. The default
value is 320 Kbps.