RADVision MCU-323 User Manual Download Page 165

Page: 165 / 185

C-1

Using the Software Upload Utility

The MCU-323 stores the operating software in its onboard Flash memory. Use the

Software

Upload Utility

to upload flash files to the MCU-323 and update or upgrade the software

modules.

Note

The Software Upload Utility serves other RADVision OnLAN units as well. You only need
to install it once on your local PC for all OnLAN units.

To run the OnLAN Software Upload Utility do one of the following

From the Start | Programs menu, point to

RADVision OnLAN Tools

and select

Software Upload Utility

Run Windows Explorer, point to the flash file

(*.fls)

you want to upload and double-

click it.

The Software Upload Utility window is displayed.

Summary of Contents for MCU-323


























































































































































































Search results

Summary of Contents for MCU-323

Reviews:

Related manuals for MCU-323

Brands by name

Popular brands

RADVision MCU-323, User Manual

Search results

Summary of Contents for MCU-323

Reviews:

Related manuals for MCU-323

Brands by name

Popular brands