RADVision MCU-323, User Manual

Page: 119 / 185

Saving the Unit Setup
6-27
File Extensions for Saved Configuration Files
Unit Setup configuration settings are saved to your local hard disk in the RVCFG directory
as a file named rvc3_00*.ini , where the asterisk (*) is the sequence number of the
configuration file. The name you assign in the Save As: text box appears only in the Source
text box of the Configuration Source screen.
The default configuration file ( RV323_xx.ini, xx being the software version number)
located in the RVCFG directory, lists all new configuration files that have been created as:
Entry_n= file name . Note that the configuration file names (Plug & Play, Current, etc.) do
not have a file extension.
For example:
[SETUP_DIRECTORY]
FileExist=1
Entries=3
;don't delete this line
Entry_1=Plug & Play
Entry_2= mcu_Setup
Entry_3= mcu_setup 2
Where "Entries=3" Indicates the number of configuration entries available, and
"Entry_2= mcu_Setup"
is the configuration file name, as entered in the Save As: box
shown in Figure 6-13 .