RADVision MCU-323, User Manual

Page: 114 / 185

Configuring the Unit
6-22
Configuring a Dedicated MP
For the Distributed MCU-323 and its MPs to function properly, you must also configure the
MCU-323 units defined in the
MP Definition Table to function as Dedicated MP units.
Note
For better bandwidth utilization in the Distributed MCU-323 and its associated MPs, it is
recommended that you connect each MP on a separate LAN segment.
Identification Information
The Unit Identifications screen displays basic identification information for the MCU-323.
All parameters except for Location are read-only. The system administrator can use the
Location parameter for mapping the unit on a network.
The following are the available Identification Information parameters. See Figure 6-1 for an
example of the screen:
Unit’s Name — Displays the unit’s logical name.
Location (text box) — Type a description of the unit physical location in the provided text
box.
Contact — Displays the name and/or number of the person to contact for assistance.
Description — Displays a description of the unit.
Date/Time (button) — Displays the Date/Time Settings screen for adjusting the call time.
Date/Time Settings
Refer to Figure 6-2 for an example of the Date/Time Settings screen.
The Date/Time Settings screen displays the local time and date, and allows you to set the
time and date displayed for a remote unit according to the Time Difference you enter.
Local Date/Time (read only) — States current time and date at your site in US time format.
Time Difference — Allows you to enter a time interval between the local unit and a remote
site in 1/2-hour units, for a maximum difference of plus or minus 23.5 hours.
Remote Date/Time — Displays the current time and date at a remote site, according to the
Time Difference entered.