RADVision MCU-323, User Manual

Page: 113 / 185

Configuring a Distributed MCU-323
6-21
LAN Port Settings for a Distributed MCU-323
The LAN Port Settings screen defines the LAN port (see Figure 6-6 ). The following are
the available parameters:
Port Number — Displays the port number.
Enabled — Check this check box to enable the LAN port.
Port Type — Displays the type of LAN connection.
MAC Addr — Displays the Media Access Control address of this unit.
IP Address — The IP address of the LAN port.
IP Mask — The IP mask defines the portion of the IP address that is used for sub-network
definitions.
Description — A text description of the LAN port settings.
!
To define the LAN settings
1. In the LAN Port Settings screen, enter the IP Address and IP Mask and check the
Enabled check box.
2. Click Next to display the LAN Parameters screen.
3. If the settings displayed are correct, click Yes or Finish to proceed to the Save Setup
screen, see Saving the Unit Setup. Otherwise, click No in the LAN Parameters screen
to return to the LAN Port Settings screen and modify the settings.
The LAN Parameters screen displays a summary of the LAN port settings (see Figure
6-7 ). The Status column indicates that the port is enabled or disabled . An asterisk (*)
indicates that the port parameters were edited using the LAN Port Settings screen.