RADVision MCU-323, User Manual

Page: 52 / 185

Configuring the Built–in Gatekeeper
4-6
Note
The prefixes you set in the Service Definition Table of the MCU-323 should match those
set in the Service Definition Table of the Gatekeeper. See Services Definition .
!
To define the service prefix as an additional phone number
"
If the terminal does not support the RAS protocol and has to be predefined, follow the
steps in
Adding a New Endpoint to predefine the endpoint or in Editing Endpoint
Settings if the terminal is already predefined. Add the service prefix to the Phone
Number text box.
"
If the terminal supports dynamic registration, you can either add the service to its
configuration file or predefine it as you would a terminal that does not support the RAS
protocol.
Editing the Gatekeeper Default Services
You can edit the default services from the Service Definition Table screen.
!
To edit the default services
1. From the Services Definition Table , select the service you want to edit and click Edit .
The Services Definition screen is displayed.
2. In the Services Definition screen, make the required changes and click Ok .
Deleting and Adding Gatekeeper Services
You are allowed to delete all services except for the default Gatekeeper services.
!
To delete a service from the Gatekeeper Services Definition Table
1. From the Services Definition Table , select the service you want to delete and click
Delete .
2. Click Ok or Apply for the configuration software to upload the change to the
Gatekeeper.
!
To add a service to the Services Definition Table
1. From the Services Definition Table screen, click Add . The Services Definition
screen is displayed.
2. In the Services Definition screen, type a description and a prefix and set the access
control Default and Public flags. Click Ok .