KORMORAN PL V 180 / PL VHA 180
MAINTENANCE
- 54 -
9901.00.23EN00 - 01/2016
CAUTION:
When you work on the hydraulic circuit, lower the
implement to the ground and discharge the pressure
from the hydraulic circuit.
CAUTION:
Never carry out curing, welding, cutting, grinding
RUÀDPHFXWWLQJZRUNFORVHWRWKHK\GUDXOLFFLUFXLWV
RUFRPSRQHQWVRUFORVHWRRWKHULQÀDPPDEOH
elements. When carrying out welding work on the
implement, disconnect the tractor's battery and
protect the hydraulic circuits to prevent them being
damaged by red-hot weld spatter.
ʈ
Check the wear on the hydraulic hoses (damage to the outer
sheath, wear, etc.).
ʈ
Check that the connections, components, etc. are tight.
ʈ
Empty the implement if you have to replace hydraulic circuit
components.
CAUTION:
Do not open, drill, weld or carry out any work on
hydraulic reservoirs.
IMPORTANT:
Replace hydraulic hoses with those with the same
technical properties.
IMPORTANT:
Collect the hydraulic oil, reservoirs and tyres,
and take them to a dealer or an authorised collection
point. Never leave them in nature.
13.1.1
,GHQWL¿FDWLRQRQDK\GUDXOLFKRVH
1
2
([DPSOHIRUWKHLGHQWL¿FDWLRQRQDK\GUDXOLFKRVH
ʈ
,WHP LGHQWL¿FDWLRQ&+)RU&+)7
-
&+),GHQWL¿FDWLRQRIWKHPDQXIDFWXUHU
-
10: Year of manufacture = 2010
-
11: Month of manufacture = November
or
-
3T: 3. quarter
-
10: Year of manufacture = 2010
ʈ
Item 2 = HD 208 EN 853 2SN 08 WP 350 BAR
-
HD 208: Hose type and nominal diameter.
-
EN 853: Standard for the hydraulic hose.
-
2 SN: Type of hydraulic hose.
-
08: Nominal diameter.
-
:3%$50D[LPXPSHUPLVVLEOHRSHUDWLQJSUHVVXUH
IMPORTANT:
The hoses are not permitted to be used for more
than 5 to 6 years. Check the date of manufacture.
IMPORTANT:
Inspect the hydraulic hoses after 10 operating hours
and then every 50 hours.
