KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 44 -
9901.00.23EN00 - 01/2016
10.5.1 Longitudinal
alignment
2
2
1
1
As of the 2nd pass, the tractor is in the track. The implement
must be aligned longitudinally (front/rear) so that all plough
bodies work at the same depth.
Adjustments
ʈ
Use the rear wheel's screw to adjust the working depth
(see § 10.2).
ʈ
Adjust the tractor's lifting arm height so that the implement is
horizontal.
ʈ
Position the bolt on the top link.
-
The top link's bolt must be higher on the implement side than
on the tractor side. Note the following: 1 < 2.
-
Adjust the length of the top link's bolt so that the bearing rail is
parallel to the ground when working.
10.5.2 Side
alignment
90°
The implement must be aligned sideways (from left to right).
The leg must be at a right angle to the ground.
