KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 51 -
9901.00.23EN00 - 01/2016
10.12 Adjusting the Vari Heavy Duty
skimmers (optional)
10.12.1 Vari Heavy Duty - adjusting the working
depth
Adjustment instructions
H
a
H
= factory setting:
DSSUR[FP
• The
Vari Heavy Duty
working depth is
calculated from the gap to the blade tip (H)
•
Adjust H so that the cutting edge (a) works in
the soil across the entirety of its width.
•
Ensure that all standard skimmers are set
evenly.
Adjustment -
Vari Heavy Duty
T
H
0
5
10
15
20
25
30
35
40
cm
cm
0
5
10
15
20
25
30
35
40
body working depth T
Vari Heavy Duty minium distance H
Example:
working depth T 22 cm = Vari-Fix dist. H 16 cm
Ź
Use the diagram to determine gap H.
I
II
1
2
Ź
1.) Remove the retaining ring.
Ź
2.) Remove the locking pin.
Ź
3.) Adjust working depth by aligning the hole in
the rod (I) with the pawls in the bracket (II).
Ź
4.) Insert the locking pin in the required hole
and secure with the retaining ring.
Ź
5.) Adjust all standard skimmers to the same
working depth.
10.12.2 Vari Heavy Duty - lateral overlap
B
The lateral overlap (
B
) for the
Vari Heavy Duty
is
preset to between 2 and 3 cm in the factory.
