KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 32 -
9901.00.23EN00 - 01/2016
8.2
Adjusting the working width
12’
’
16’
’
20’
’
1
2
Key
1 Display
2
Working width label
7KHLPSOHPHQWLVHTXLSSHGZLWKDQLQ¿QLWHO\DGMXVWDEOHV\VWHP
to set the furrow width. This system can be used to adjust the
implement according to the working conditions.
-
Type of soil.
-
Available tractor power.
-
The desired ploughing type (ploughing, deeper or shallower
digging for residues, etc.).
7KHSORXJKERG\VZRUNLQJGHSWKFDQEHDGMXVWHGLQ¿QLWHO\IURP
12" to 20" (30 to 50 cm) in the tractor's cab.
The system comprises a hydraulic cylinder and a double rod
outside the chassis. This position makes maintenance and
adding bodies easier.
A scale (item 2) shows the working depth of each plough body.
1
Key
1 Hydraulic
cylinder
Adjustment
ʈ
,QFUHDVHZRUNLQJZLGWKH[WHQGWKHF\OLQGHUVSDWK
ʈ
Decrease working width: reduce the cylinder's path.
8.3
Adjusting the wheel angle
The wheel angle is adjusted automatically according to the
plough body's working width.
1
2
Reduce the cylinder stroke (item 1):
-
The wheel comes closer to the implement frame (item 2).
Increase the cylinder stroke (item 1):
-
The wheel moves away from the implement frame (item 2).
IMPORTANT:
The wheel must always be parallel to the plough
body when working.
