KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 23 -
9901.00.23EN00 - 01/2016
5.4
Length of the lifting rods
2
1
Key
1 Top
position
2 Bottom
position
The length of the lifting rods on the lifting arms determines the
coupling's plumb line and the position of the lifting cylinders when
working (guarantees left/right symmetry when working).
1
2
Key
1 Crossbar
2 Bridge
ʈ
Use a setting jig (item 1) to adjust the length of the lifting
rods so that the coupling is parallel to the tractor's rear bridge
(item 2).
ʈ
Adjust the length of the lifting rods so that at least 30 mm
lifting remains available to the lifting cylinders in the working
position. This enables the amplitude of the coupling height
to be adjusted from the driver's cab and guarantees that the
tractor's anti-slip device (force control) functions correctly.
5.5
Position of the stabilisers
1
2
3
Key
1 Functional
play
2 Axles
3 Bolts
1
2
=
=
Key
1 Stabiliser
2 Axle
Ensure that the gap between the stabilisers (item 1) is the same
DVWKDWRIWKHWUDFWRUVD[OHLWHP
IMPORTANT:
Lubricate and remove rust from the screws and
threads on the stabilisers (anchor bolts or wedges)
before coupling the implement to the tractor.
7KHKRUL]RQWDOD[OHVLWHPPXVWEHLQD¿[HG
position to prevent any possibly dangerous and
redundant play or any play that occurs suddenly.
