KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 48 -
9901.00.23EN00 - 01/2016
10.9.3
Adjusting the stop of the swing arm on the
disc coulter
Adjustment instructions
ʈ
The side swing of the disc coulter (1) is limited by the adjusting
ring (2).
ʈ
In combination with the standard skimmers, adjust the stop so
that the disc coulter cannot strike the standard skimmer.
Adjustment
2
3
1
Key
1 Disc
coulter
2 Adjusting
ring
3 Clamping
bolt
ʈ
Undo the clamping bolt (3) on the adjusting ring.
ʈ
Rotate the adjusting ring (2) so that the disc coulter:
-
Can turn to the direction of travel.
-
Does not strike any components when swinging out.
ʈ
Tighten the clamping bolt to the correct torque.
Torque
Size
Quality grade 8.8
:LGWKDFURVVÀDWV
Nm
Ib/ft
M 16
230
170
24
10.10 Adjusting the round rod for the
standard skimmers
(additional equipment)
10.10.1 Adjusting the round rod's working depth
Adjustment instructions
+ IDFWRU\VHWWLQJDSSUR[FP
ʈ
Adjust the working depth so that the cutting edge (a) works in
the soil across the entirety of its width.
ʈ
Ensure that all standard skimmers are set evenly.
Adjusting the round rod
H
H
a
1
2
Key
1 Clamping
bolt
2 Move
ʈ
Undo the clamping bolt (1).
ʈ
Adjust the standard skimmer's working depth by moving (2).
ʈ
Tighten the clamping bolt (1) to the correct torque.
ʈ
Adjust all standard skimmers to the same working depth.
Torque
Size
Quality grade 10.9
:LGWKDFURVVÀDWV
(DIN ISO 272)
Nm
Ib/ft
M 20
661
488
30
