KORMORAN PL V 180 / PL VHA 180
MAINTENANCE
- 53 -
9901.00.23EN00 - 01/2016
10.15 Adding additional plough bodies
You can add additional plough bodies to the front and rear of
WKHLPSOHPHQW9DULRXVFRQ¿JXUDWLRQVDUHSRVVLEOH)RUIXUWKHU
information please contact your dealer.
MAINTENANCE
CAUTION:
Read the safety instructions (see
§
2) before you
start maintenance or to replace individual parts.
• The user and the owner are responsible for
maintaining the implement.
• Shut down the engine and remove the ignition key
from the tractor before carrying out any work on the
implement.
• Risk of accident due to pinching or crushing while
performing maintenance or cleaning work.
• Stabilise the implement before maintaining or
cleaning it.
• Ensure that the implement cannot be started up
unexpectedly while carrying out the maintenance or
cleaning work.
CAUTION:
Ensure that the techniques used to lift the implement
guarantee your safety.
CAUTION:
2QO\TXDOL¿HGSHUVRQQHOPD\LQVWDOODQGUHPRYH
tyres.
IMPORTANT:
The implement's user and owner must not touch or
adjust closed components under any circumstances.
11 E
NVIRONMENTAL
PROTECTION
11.1 Soil
contamination
IMPORTANT:
Ensure that no used oil and no substances such as
hydraulic oil get into the soil or the drain system.
IMPORTANT:
Collect drained hydraulic oil in closed, clean
containers that are intended for this purpose.
11.2 Used
tyres
CAUTION:
Storing, leaving or disposing of used tyres in nature
or burning used tyres in the open air is prohibited.
Take them to a dealer or an authorised collection
point.
12 C
LEANING
Clean the implement.
ʈ
When using a high pressure cleaner, avoid the joints,
the bearings, the rollers and the electrical components.
ʈ
Pay particular attention to the safety labels on the implement.
Worn or detached labels must be replaced.
ʈ
Do not use an air compressor to clean hydraulic components.
ʈ
After each cleaning process, lubricate the entire implement.
13 I
NSPECTION
IMPORTANT:
Carry out the inspections and repairs that are
required after every use.
ʈ
Check the general condition of the implement:
-
Welds.
-
Wheels, tyres and wheel bolts.
-
7KHVFUHZVRQZHDUSDUWVXQGHUVWRQ\FRQGLWLRQVVLJQL¿FDQW
vibrations).
13.1 Checking the hydraulic system
CAUTION:
1(9(5SODFH\RXUKDQGRQK\GUDXOLFÀXLGWKDWKDV
escaped. You must use a tool to search for the leak.
There is a risk of injury and infection due to the
K\GUDXOLFÀXLG+\GUDXOLFÀXLGVWKDWHVFDSHXQGHU
high pressure can penetrate the skin and cause
severe or fatal injuries.
CAUTION:
Your implement is possibly equipped with hydraulic
reservoirs, which are pressurised; dismantling these
devices and their supply lines is dangerous and is
prohibited. This work may only be carried out by
TXDOL¿HGSHUVRQQHOFRQWDFW\RXUOLFHQVHGGHDOHU
