KORMORAN PL V 180 / PL VHA 180
MAINTENANCE
- 64 -
9901.00.23EN00 - 01/2016
ʈ
Screw the nuts on again.
ʈ
Lower the jack.
ʈ
Tighten the nuts to the correct torque.
ʈ
Move the implement back into the transport position.
IMPORTANT:
Check the wheel bolts after a few kilometres.
Re-tighten them if necessary.
16 S
PARE
PARTS
In order to guarantee operational safety and a long service life
for the implement, use only manufacturer's original spare parts.
Installing any parts other than those from the manufacturer
causes the implement's warranty to become invalid.
IMPORTANT:
The implement has a CE mark. Only use new,
original spare parts that are approved by the
manufacturer.
ʈ
Ensure that the spare parts are installed correctly and are
attached in the correct direction. Inspect the implement after
installing each part and after each maintenance procedure;
ensure that it is working correctly.
16.1 Maintaining the plough bodies
IMPORTANT:
Protect the working surfaces on the mouldboards
and shares against corrosion by applying a thin
layer of oil or grease.
ʈ
If the soil is particularly sticky, use a sprayer or a spray can to
DSSO\DWKLQ¿OPRIOLTXLGRLORQWRWKHPRXOGERDUGVDIWHU\RX
KDYHOHIWWKH¿HOG
ʈ
When storing, slow down the corrosion process using a thicker
layer of oil or graphite spray on the mouldboards.
