KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 31 -
9901.00.23EN00 - 01/2016
7.4.5
Special attributes of the selection switch
Deactivating a function
ʈ
Press the relevant button for deactivation.
ʈ
3UHVVDQGKROGWKHEXWWRQ7KH/('LVH[WLQJXLVKHG
ʈ
Switch the function selection switch off by pressing button A
(section 7.4.3).
Reactivating a function
ʈ
Switch the function selection switch on by pressing button A
(section 7.4.3).
ʈ
Press the relevant button for reactivation.
ʈ
Press and hold the button. The LED illuminates.
Selecting the active function when switching on
The selection switch can be in the following positions when
switching on:
ʈ
Function 1 (default setting).
ʈ
The function that was active when the selection switch was
switched off.
&KDQJHWKHFRQ¿JXUDWLRQE\SUHVVLQJEXWWRQIRUVHYHUDO
seconds.
8 P
REPARING
THE
IMPLEMENT
BEFORE
WORKING
8.1
Location of the adjustment points
ʈ
Mark the different adjustment points.
ʈ
Ensure that they are ready for operation and lubricated.
&DUU\RXWWKHFKHFNVEHIRUHGULYLQJRQWKH¿HOG
1
2
4
5
3
6
7
Key
1
Hydraulic control for transmission (optional)
2
Adjustment screw in vertical position
3
Calibration of the hydraulic non-stop locking devices (optional)
4 Offset
cylinder
5
Front depth wheels
6
Adjusting the working width
7
Adjusting the working depth
