KORMORAN PL V 180 / PL VHA 180
MAINTENANCE
- 66 -
9901.00.23EN00 - 01/2016
ʈ
Discharge the pressure from the hydraulic circuits by moving
the tractor's control lever (tractor engine switched off).
ʈ
Store the implement away from human activity.
ʈ
Store the implement in a clean, dry location. To prevent
corrosion on the cylinder rods, remove or lubricate them.
ʈ
The wheels can rotate freely. Do not store anything between
them and do not support yourself on them.
16.3.1
Moving the subsoiler (additional equipment)
into the storage position
L
A
2
1
Key
1 Shear
bolt
2 Pivot
bolt
Before shutting down, the subsoiler on the ground side must be
moved from the working position (W) to the storage position (S).
Installation
L
2
1
Key
1 Shear
bolt
2 Pivot
bolt
ʈ
Remove the shear bolt (1) and the pivot bolt (2).
ʈ
Install the subsoiler in the storage position (S).
ʈ
Insert the shear bolt (1) and the pivot bolt (2) from the
subsoiler side.
ʈ
Tighten the threaded connection.
16.4 Starting up again and inspecting
ʈ
After storing, carry out a complete and visual inspection
(corrosion, hydraulic hose, tyre pressure, etc.) before using
the implement.
ʈ
Couple the implement after the inspection and check that it is
functioning properly.
