KORMORAN PL V 180 / PL VHA 180
OPERATING
INSTRUCTIONS
- 15 -
9901.00.23EN00 - 01/2016
3.8
Offset setting jig
1
2
3
Key
1 Hydraulic
cylinder
2
Mounting outside the track
3
Mounting inside the track
The implement is equipped with a large setting jig to offset the 1st
plough body. A hydraulic cylinder (item 1) controls the opening
and closing processes for the setting jig.
IMPORTANT:
The offset setting jig must be closed to turn the
implement.
7KH¿UVWSORXJKERG\LVWKHQQHDUHUWRWKHURWRU7KLVPHDQVWKDW
ʈ
The force required to turn the implement is lower.
ʈ
The implement's pivot range is lower.
ʈ
The procedure is safer and simpler.
Two positions for mounting the offset cylinder on the setting jig:
ʈ
Position for ploughing outside the track (pos. 2):
-
7KHWUDFWRUGULYHVÀDWRQIRXUZKHHOVWRWKHVXUIDFHWREH
ZRUNHGRQ0D[LPXPWRWDOSHUPLVVLEOHZLGWKRIWKHWUDFWRU
3.50 m (16" working width, gap between the outside of the
rear tyre and the plough furrow is 0.25 m).
IMPORTANT:
Do not work inside the track when the cylinder is in
this position.
ʈ
Position for ploughing inside the track (pos. 1): The tractor
drives with two wheels in the track and two wheels on the
surface to be worked on.
-
Minimum clearance between the insides of the rear tyres: 1.30 m
-
0D[LPXPFOHDUDQFHEHWZHHQWKHLQVLGHVRIWKHUHDUW\UHVP
3.9
Hydraulic control for transmission
(optional)
Uncoupled position
1
2
Key
1 Hook
2 Cylinder
Coupled position
1
2
Key
1 Hook
2 Cylinder
The hydraulic control for the transmission is a patented device.
,WHQDEOHVRSWLPXPWUDFWLRQRQWKHIURQWD[OHIRUWUDFWRUVZLWK
four-wheel drive. It results in better weight distribution, whereby
VOLSSLQJDQGWKHWHQGHQF\IRUD[OHSUHVVXUHUHOLHIDUHSUHYHQWHG
$WWKHVDPHWLPHWKHHI¿FLHQF\RIWKHWUDFWRUVSRVLWLRQFRQWUROLV
improved.
