Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Chassis
162
Quantum DXi6902 User’s Guide
Caution:
Take care not to damage the system identification
button while placing the system board into the chassis.
3
Push the system board toward the back of the chassis until the
board clicks into place.
4
Install the following components (removed form the failed Node
chassis) in the replacement Node chassis:
a
Hard drive backplane (see
Replacing the Hard Drive Backplane
b
Removing and Installing the Information
c
Removing and Installing the Cable
d
PCIe card holder (see
Removing and Installing the PCIe Card
e
Integrated storage controller card (see
f
Replacing an Expansion Card in Riser
on page 110 and
Replacing an Expansion Card in Riser 2 or 3
g
Cooling fan assembly (see
Removing and Installing the Cooling
h
Power supplies (see
5
Reconnect all cables to the system board.
Note:
If using optical 10 GbE cables, move the SFPs from the
failed Node chassis to the replacement Node chassis.
Note:
Ensure that the cables inside the system are routed along
the chassis wall and secured using the cable securing
bracket.
6
Close the Node cover (see
Summary of Contents for DXi6902
