![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123191.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing Array or Expansion Module Hard Drives
Quantum DXi6902 User’s Guide
167
Figure 100 Removing and
Installing an Array or
Expansion Hard Drive
Installing a Replacement Drive in an Array or Expansion
Module
To install the replacement hard drive in a DXi6902 Array module (RBOD)
or Expansion module (EBOD):
Caution:
When installing a hard drive, ensure that the adjacent
drives are fully installed. Inserting a hard-drive carrier and
attempting to lock its handle next to a partially installed
carrier can damage the partially installed carrier's shield
spring and make it unusable.
1
Open the hard-drive carrier handle (see
)..
2
Insert the hard-drive carrier into the hard-drive slot until the carrier
connects with the backplane.
3
Close the hard-drive carrier handle to lock the hard drive in place.
• It may take up to 30 seconds for the system to detect that a
failed drive was removed and a new drive was inserted.
• The activity indicator for all drives in the Array module or
Expansion module will blink green while the drive is rebuilding.
Hard drive handle
Hard drive carrier
Summary of Contents for DXi6902
