![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123177.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node
Quantum DXi6902 User’s Guide
153
7
Verify that the following iDRAC setting is set to
Disabled
:
•
Enable IPMI Over LAN
- Disabled
8
Press
<ESC>
twice.
The system prompts you to save the changes.
9
Select
Yes
and press
<Enter>
.
The system states that the changes were saved.
10
Select
OK
and press
<Enter>
.
11
Select
Yes
and press
<Enter>
to reboot the system.
Replacing the Node
This section describes how to remove and replace the DXi6902 Node
and contains the following sections:
•
•
Obtaining a
Replacement Node
Before beginning the replacement procedure, make sure that you have
the required replacement kit. The appropriate replacement Node will be
provided by Quantum Customer Support (see
).
You will need the following items to perform this procedure:
• Replacement Node kit provided by Quantum Customer Support.
• Masking tape and felt tip marker (for temporarily labeling hard
drives)
• ESD grounding wrist strap (included in the replacement kit)
Summary of Contents for DXi6902
