Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing an Array Module Controller
Quantum DXi6902 User’s Guide
175
4
Locate the failed controller on the back of the Array module by
viewing the
Service Action LEDs
).
•
Service Action Required
- This LED is lit when the component
has failed, but it is not yet in a state to be replaced.
•
Service Action Allowed
- This LED is lit when the component
has failed and is ready to be replaced.
Figure 107 Array Module
Controller Failure LEDs
Removing a Failed Array Module Controller
To remove the failed Array module controller:
1
Prepare the controller air blocker by removing it from the packaging
and folding it inward at right angles so it is ready to insert into the
).
Port 1
Port 2
ID/
Diag
|O|O|
Port 1
Port 2
ID/
Diag
Port 1
Port 2
ID/
Diag
Service action required
Service action allowed
Controller A
Controller B
Summary of Contents for DXi6902
