![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123214.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing an Array or Expansion Module
190
Quantum DXi6902 User’s Guide
4
Run
Factory Detect Hardware
from the
Service Menu
to detect the
5
In the remote management console, delete any administrative alerts
and close any service tickets.
Note:
In some cases, following replacement of a failed ESM, it is
possible that the drives in the EBOD will be in
Optimal
state
but the volumes will be in
Failed
state (see PTR 36565). To
correct this condition while maintaining data integrity, escalate
to Quantum SES and reference NetApp knowledge base article
2016816.
Replacing an Array or Expansion Module
This section describes how to remove and replace the DXi6902 Array
module (RBOD) or Expansion module (EBOD) chassis and contains the
following sections:
•
Obtaining a Replacement Array or Expansion Module Chassis
•
Replacing the Array or Expansion Module Chassis
Obtaining a
Replacement Array or
Expansion Module
Chassis
Before beginning the replacement procedure, make sure that you have
the required replacement kit. The appropriate replacement Array
module or Expansion module chassis will be provided by Quantum
Customer Support (see
).
You will need the following items to perform this procedure:
• Replacement Array module or Expansion module chassis kit
provided by Quantum Customer Support.
• Masking tape and felt tip marker (for temporarily labeling hard
drives)
• # Phillips screwdriver
• ESD grounding wrist strap (included in the replacement kit)
Summary of Contents for DXi6902
