Quantum DXi6902, Field Service Manual, Page: 64 / 242

Chapter 2: DXi6902 Service Menus
Accessing the DXi6902 Service Menu
40 Quantum DXi6902 User’s Guide
• Manufacturing - Includes tools for manufacturing. Do not use
these options in the field.
Factory Detect Hardware
Use the Factory Detect Hardware menu to create a factory list of
detected hardware.
You should run Factory Detect Hardware when:
• New hardware is added, or existing hardware is replaced, on the
DXi6902.
Note: It is not necessary to run Factory Detect Hardware after a
storage capacity expansion, after replacing a drive, or after
installing a 10 GbE network card.
• Hardware status functions display incorrect or incomplete
information.
Factory Detect Hardware should show all components to be up and no
component in an error status. If there are errors, make sure the new
hardware is installed correctly.
Note: Hardware status functions may display incorrect information
while Factory Detect Hardware is running.
To perform a factory detect hardware:
1
Access the
Service Menu
(see Accessing the DXi6902 Service Menu
on page 34).
2
From the
Service Menu
, type the option for
Hardware
Configuration
and press
<Enter>
.
3
From the
Service Hardware Configuration Menu
, type the option
for
Factory Detect Hardware
and press
<Enter>
to create a
factory list of detected hardware. This will take several minutes.
4
When complete, type
q
to return to the
Service Menu
.
Note: You can view the updated configuration in the following file:
/opt/DXi/hwdetect/factory.config.