![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123201.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing an Array Module Controller
Quantum DXi6902 User’s Guide
177
Figure 109 Removing and
Installing an Array Module
Controller
4
Insert the controller air blocker into the open controller slot to make
sure that correct airflow is maintained.
Installing a Replacement Array Module Controller
To install the replacement Array module controller:
1
Remove the BBU from the failed Array module controller and install
the BBU in the replacement controller (see
2
Remove the controller air blocker from the controller slot.
3
Slide the replacement Array module controller into the empty bay
until the controller snaps into place, and push the handles into the
closed position (see
).
4
Connect the SAS cables to the new controller (see
5
Run
Factory Detect Hardware
from the
Service Menu
to detect the
Array module controller handles
Summary of Contents for DXi6902
