![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123118.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing Node Power Supplies
94
Quantum DXi6902 User’s Guide
Figure 51 Removing and
Installing a Node Power Supply
Installing a Replacement Power Supply in the Node
To install the replacement power supply in the DXi6902 Node:
1
Slide the replacement power supply into the chassis until the power
supply is fully seated and the release latch snaps into place (see
).
2
Connect the power cable to the power supply and plug the cable
into a power outlet.
3
Secure the power cable with the strap.
Allow several seconds for the system to recognize the power supply
and determine its status. The power supply status indicator turns
green to signify that the power supply is functioning properly.
4
In the remote management console, delete any administrative alerts
and close any service tickets.
Connector
Power supply
Release latch
Handle
Strap
Summary of Contents for DXi6902
