![background image](http://html.mh-extra.com/html/emerson/hpr12k-00/hpr12k-00_operating-instructions-manual_104308001.webp)
Rev.06.09.10
HPR12K-00
1 of 6
313
process
yellow
3405
1797
1375
116
2607
652
242
2985
375
240
Embedded Power for
Business-Critical Continuity
Operating Instructions
1. General Install
Connecting the input power cable, output load cable and communication wire according
to the below figure.
HPR12K-00
AC INPUT
AC INPUT
AC INPUT
AC INPUT
Main DC Output
Aux. DC
Output
I2C/PMBus
Communication
Main DC Output
AC Line Input
2. General Settings
Unless otherwise specified, when the PSON# switch is de-asserted (48V o/p is disabled).
It is means Manual ON/OFF DIP switch SW1 should be default according to below table.
And It must be checked before shipping.
Power Supplies
Status
PSU 1#
PSU 2#
PSU 3#
PSU 4#
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH8
OFF
Up
Down
Up
Down
Up
Down
Up
Down
Note 1. The status Down means set to ON position. The status UP means set to OFF position.
Note 2. Programming Switch SW1 default settings:
PSON switches : OFF
PSKILL switches : ON
DIP switch SW1 setting as a default