Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller
Quantum DXi6902 User’s Guide
121
Caution:
To enable encryption on the new PERC H710 controller, you
will need the passphrase used to enable Data-at-Rest
Encryption on the DXi6902. The customer should have
recorded this passphrase. In addition, the customer should
have created a Data-at-Rest Recovery File. The passphrase is
contained in the recovery file. Note that accessing the
recovery file requires the password used at the time the file
was created.
1
In the remote management console, check the Data-at-Rest
Encryption status on the
Home
).
• If the status is
Enabled
, you
must
enable the encryption keys on
the PERC H710 controller. Obtain the Data-at-Rest Encryption
passphrase from the customer, and continue with this
procedure.
• If the status is
Disabled
, you do not need to enable the
encryption keys on the PERC H710 controller. Skip the rest of
this procedure.
Figure 69 Checking Data-at-
Rest Encryption Status
Data-at-Rest
Encryption Status
Summary of Contents for DXi6902
