![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123209.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing an Expansion Module ESM Canister
Quantum DXi6902 User’s Guide
185
2
Tighten the thumbscrew that secures the new battery to the
controller canister.
3
Reinstall the top cover on the controller canister.
4
Remove the controller air blocker from the controller slot.
5
Slide the replacement Array module controller into the empty bay
until the controller snaps into place, and push the handles into the
closed position (see
).
6
Connect the SAS cables to the controller with the new BBU (see
7
Reset the BBU installation date:
a
Access the
Service Menu
(see
b
Navigate to
Hardware Configuration > Setup external
Storage > Reset Array BBU date
.
c
Follow the prompts to reset the age counter of the replacement
BBU. Make sure to specify the correct Array module.
8
Run
Factory Detect Hardware
from the
Service Menu
to detect the
9
In the remote management console, delete any administrative alerts
and close any service tickets.
Replacing an Expansion Module ESM Canister
This section describes how to remove and replace the ESM canister in a
DXi6902 Expansion module (EBOD) and contains the following sections:
•
Obtaining a Replacement Expansion Module ESM Canister
•
Summary of Contents for DXi6902
