![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123129.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing Node Memory Modules
Quantum DXi6902 User’s Guide
105
4
Press down and out on the ejectors on each end of the socket until
the memory module pops out of the socket (see
).
Figure 58 Removing and
Installing a Memory Module
Installing a Replacement Memory Module in the Node
To install the replacement memory module in the DXi6902 Node:
Caution:
Handle the memory modules by the card edges and avoid
touching the components on the memory module.
1
Align the memory module’s edge connector with the alignment key
of the memory module socket, and insert the memory module in
).
Note:
The memory module socket has an alignment key that
allows you to install the memory module in the socket in
only one way.
2
Press down on the memory module with your thumbs until the
ejector latches snap into a locked position.
3
Close the Node cover (see
4
Turn on the system (see
Turning On and Shutting Down the System
Memory module
Ejector latch
Socket alignment key
Summary of Contents for DXi6902
