Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller
Quantum DXi6902 User’s Guide
119
Figure 68 Removing and
Installing the Integrated
Storage Controller Card
Installing a Replacement Integrated Storage Controller
To install the replacement integrated storage controller in the DXi6902
Node:
1
Align one end of the integrated storage controller card with the
card holder on the system board (see
).
2
Lower the other end of the card into the storage controller card
holder on the system board.
3
Press the card down until it is fully seated.
Note:
When the card is fully seated, the release levers snap over
the edge of the card.
4
Replace the expansion card riser 1 (see
).
5
Close the Node cover (see
Storage connector on
system board
Storage controller card
Storage controller
card holder
Release levers
Summary of Contents for DXi6902
