![background image](http://html2.mh-extra.com/html/quantum/dxi6902/dxi6902_field-service-manual_3782123137.webp)
Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing Node Expansion Cards
Quantum DXi6902 User’s Guide
113
9
In the remote management console, delete any administrative alerts
and close any service tickets.
Replacing an Expansion
Card in Riser 2 or 3
This section describes how to remove and replace an expansion card in
expansion card riser 2 or riser 3. The following cards are located in riser
):
• Expansion Card Riser 2
•
Slot 4 (top)
- No card
•
Slot 5 (bottom)
- Quad port 6 Gb SAS card (LSI 9201-16E)
• Expansion Card Riser 3
•
Slot 6 (top)
- Quad port 6 Gb SAS card (LSI 9201-16E)
•
Slot 7 (bottom)
- Quad port 8 Gb Fibre Channel card (Qlogic
QLE2564)
Caution:
Use appropriate ESD precautions, including the use of a
grounding strap, when performing this procedure.
Removing and replacing an expansion card in expansion card riser 2 or
riser 3 includes the following steps:
•
Removing an Expansion Card from Riser 2 or 3
•
Installing an Expansion Card in Riser 2 or 3
Removing an Expansion Card from Riser 2 or 3
To remove a failed expansion card from riser 2 or 3:
1
Shut down the system (see
Turning On and Shutting Down the
2
3
Disconnect any cables connected to the expansion card.
4
Holding the touch points, lift the expansion card riser 2 or 3 from
the riser connector on the system board (see
and
).
Summary of Contents for DXi6902
