Quantum DXi6902, Field Service Manual, Page: 48 / 242

Chapter 1: DXi6902 Basic Operations
Accessing Remote Management
24 Quantum DXi6902 User’s Guide
Note: For correct operation of the remote management console,
disable any pop-up blockers and enable JavaScript in your Web
browser.
Logging On to the
DXi6902
To log on to the DXi6902 remote management console:
1 Launch a supported Web browser on a workstation that has
network access to the DXi6902.
2 In the browser address box, type the IP address of the DXi6902, and
then press <Enter> .
The Login window displays (see Figure 16 ).
Figure 16 Login Window
If the Login window does not display, verify that the IP address is
correct and that the network path to the DXi6902 is valid. Also
verify that you are using a supported Web browser. Then try again.
If you are still unable to access the Login window, contact your
DXi6902 administrator.
Note:
The default IP address is
10.1.1.1
. The IP address can be
changed during installation using the
Getting Started
Wizard
or at a later time on the
Configuration > System
> Network
page.