Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Chassis
Quantum DXi6902 User’s Guide
159
Caution:
You
must
note the number of each hard drive and
temporarily label them before removal so that you can
install each of them in the correct location in the
replacement Node chassis.
4
Remove the following components from the failed Node chassis (for
installation in the replacement Node chassis):
a
Power supplies (see
b
Cooling fan assembly (see
Removing and Installing the Cooling
c
Replacing an Expansion Card in Riser
on page 110 and
Replacing an Expansion Card in Riser 2 or 3
d
Integrated storage controller card (see
e
PCIe card holder (see
Removing and Installing the PCIe Card
f
Removing and Installing the Cable
g
Removing and Installing the Information
h
Hard drive backplane (see
Replacing the Hard Drive Backplane
i
If present, support bracket (see
Note:
The support bracket is present on certain system
configurations for protection during shipping and can
be discarded after removal.
5
Disconnect the mini SAS cable from the system board:
Caution:
To avoid damaging the mini SAS cable and connector,
follow the correct procedure when removing the mini
SAS cable from the system board.
Summary of Contents for DXi6902
