Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller
Quantum DXi6902 User’s Guide
117
Figure 66 DXi6902 Node
Integrated Storage Controller
Replacing the
Integrated Storage
Controller
This section describes how to remove and replace the integrated storage
controller in the DXi6902 Node.
Caution:
Use appropriate ESD precautions, including the use of a
grounding strap, when performing this procedure.
Removing and replacing the integrated storage controller in the Node
includes the following steps:
•
Identifying a Failed Integrated Storage Controller
•
Removing a Failed Integrated Storage Controller
•
Installing a Replacement Integrated Storage Controller
•
Enabling Data-at-Rest Encryption on a Replacement Integrated
Identifying a Failed Integrated Storage Controller
The DXi6902 Node contains an integrated storage controller (Dell PERC
H710) that supports the SAS hard drives in the Node.
To identify a failed integrated storage controller:
1
Access the remote management console (see
Illustration
Description
Replacement integrated
storage controller (Dell
PERC H710)
PN FRH64
Summary of Contents for DXi6902
