Quantum DXi6902, Field Service Manual, Page: 221 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
Quantum DXi6902 User’s Guide 197
Removing and
Installing the PCIe Card
Holder
To remove and replace the PCIe card holder, refer to the following
procedures:
• Removing the PCIe Card Holder
• Replacing the PCIe Card Holder
Removing the PCIe Card Holder
To remove the PCIe card holder:
1
Press the release tab and the touch-point to release the PCIe card
holder from the chassis (see Figure 123 ).
2
Lift the PCIe card holder out of the chassis.
Figure 123 Removing and
Installing the PCIe Card Holder
Replacing the PCIe Card Holder
To replace the PCIe card holder:
1 Align the PCIe card holder with the projection on the chassis and
push it down until firmly seated (see Figure 123 ).
PCIe card holder Release tab