PRÜFTECHNIK VIB 5.300 EX Series, Operating Instructions Manual

Page: 90 / 172

3-36
VIBXPERT 11.2010
Recording
Recording
With the ‘Recording’* function, you can perform measurements
dependent on time or rotational speed. For example, this method can
be used to record measurement values under certain operating
conditions (= rpm range) or at fixed time intervals.
Availability and restrictions
Recording is available in 'Multimode' for every measurement, with
the following exceptions:
-
C
OASTDOWN CURVE
- I
MPACT TEST
- T
IME WAVEFORM RECORDER
- P
HASE
- C
ROSS
C
HANNEL
Restrictions also apply to the following measurements:
-
S
PECTRUM
: Averaging is not possible for rpm-controlled recordings.
- T
IME WAVEFORM
: The 'time sychronous' averaging type is not
permissible.
- M
ULTI MEASUREMENT TASKS
: rpm-controlled recording is not possible.
- S
HOCK PULSE MEASUREMENT
(
ROLLER BEARING CONDITION
): rpm-controlled
recording is only possible without normalization.
Configuration
• Click on 'Multimode' in the start screen.
• Select the measurement for which you want to set up recording.
• Press the MENU key and click on 'Recording' (see below).
* Firmware module ‘Recording’ (VIB
5.385) must be registered.
Opening the recording
configuration window