3-15
VIBXPERT 11.2010
Start measurement
• Click on 'Machine template' in the start screen.
A list of the available machine templates appears (see below).
Machines where measurements have already been carried out
appear subordinate to the associated template. The number of the
measured measurement location and the total number of mea-
surement locations is indicated in the right column ('Finished') for
each machine.
The info field for the highlighted machine at the bottom shows
when the corresponding template was loaded into the data
collector and when the last measurement was carried out.
To continue the measurement on a machine, click on the corre-
sponding subordinate machine.
• Click on the template that you want to use for the measurement.
The ‘Machine description’ dialog appears where only one name for
the new machine (e.g. ‘Machine 2’) is specified as standard.
• If you do not want to enter any further information, press the
MENU key and click on ‘OK’ to accept the name.
• Otherwise press the MENU key, click on ‘Details’ (see below) and,
if necessary, enter the necessary data as follows:
-
Position the cursor in the corresponding text field and click with
the joystick to open the text editor.
-
After entering the data, press the MENU key and click on OK.
You can change the machine description at any time.
Template
Machine
Measurement - Machine template
Note
Info field
Left:
Enter machine details
Right:
Machine template list
Summary of Contents for VIB 5.300 EX Series
Page 170: ...6 24 VIBXPERT 11 2010 Decleration of conformity ...
Page 171: ...6 25 VIBXPERT 11 2010 ...
